Loading...
Fixed written quotes
Repair and restoration of natural and engineered stone across the Gold Coast and Brisbane. Scratches, chips and cracks in marble, travertine, limestone, sandstone, terrazzo and engineered stone, on floors, benchtops, showers and furniture.
We repair scratches, chips and cracks in natural and engineered stone: marble, travertine, limestone, sandstone, terrazzo and engineered surfaces like Caesarstone. The work covers benchtops, shower floors and wall tiles, stone furniture and whole floors, using colour-matched resins and pigments so the repair disappears into the stone. Where a floor has gone dull from trolley wear or foot traffic, the whole surface is honed and re-polished rather than patched.
Diamond-grinding, honing, polishing and repair of natural and engineered stone surfaces.
The stone type, the finish it currently carries and the damage are identified and documented first, because the same repair does not suit marble and travertine.
Cracks and chips are filled with colour-matched resins and pigments, then cut back flush so the repair reads as part of the stone.
Progressive diamond pads take out scratches, etch marks and trolley wear across the whole surface, not just the damaged patch.
The stone is brought back to its original finish, honed or polished, matched to the rest of the floor or benchtop.
An impregnating sealer suited to the stone type goes on, breathable where the building fabric needs it.
Drawn from manufacturer data for the systems we use. Your floor's specification is confirmed when we quote.
| Stone types | Marble, granite, travertine, limestone, bluestone, sandstone, porphyry |
|---|---|
| Process | Diamond grind, hone, densify, polish, seal, repair |
| Repairs | Chips, cracks, etches, burns, stains |
Manufacturer data sheets, SWMS and insurance certificates are available on request.
Selected at quote stage and confirmed on a sample board before install.
Fit-out programmes that slip. Finishes that don't match the render. Disruption in an occupied centre. Slip testing the tenancy manager actually accepts.
See solutions By industryFit-out programmes crunching. Green Star credits needing low-VOC. Tenant coordination. Handover documentation the PM can actually file.
See solutionsUsually yes. Etches are micro-damage, honed out with progressive diamond pads and re-polished to match the original finish.
Yes, for burns, chips and edge damage. Full surface re-polishing on engineered stone is case by case.
Yes. We document first, grind carefully, match the historic finish and use breathable sealers where the building needs them.
In most cases yes, with colour-matched resin cut back flush, rather than removing the tile.
Tell us the area and send a photo of the floor. We look at it before we price it, and the quote comes to you in writing.