Loading...
Fixed written quotes
Compare polished concrete, grind and seal, epoxy, industrial coatings and other finishes for residential, commercial and industrial floors.
Each page explains the finish, preparation and suitable applications, with photos from completed work.
Polished into the slab itself, high-gloss or satin. Showrooms, offices, living areas and warehouse floors.
See the work
Jointless epoxy and resin coatings for warehouses, factories, garages and commercial facilities.
See the work
Indoor slabs ground back and sealed for living areas, garages, retail floors and commercial fit-outs.
See the work
Vinyl flake broadcast into a resin base. Decorative and slip-resistant for garages, workshops and pool surrounds.
See the work
Custom poured, ground and sealed benchtops, vanities and outdoor kitchens.
See the work
A thin, jointless stone-look render over floors, walls, benchtops and feature elements.
See the work
A low-sheen, stone-exposed finish with natural slip resistance. Alfresco areas, pool surrounds and entries.
See the work
Grinding, honing, polishing and repair of marble, granite, limestone, terrazzo and travertine.
See the work
Surface preparation, coating and glue removal, crack repair, levelling, moisture testing and re-sealing.
See the workResidential, commercial and industrial work photographed on site.
Start with where the floor is, how it will be used and the finish you want. The site inspection confirms the suitable system.
| Finish | Best for | Lifecycle | Typical install | Relative cost | Maintenance |
|---|---|---|---|---|---|
| Mechanically polished concrete | Living areas, showrooms, shops, warehouses | Life of the slab, no re-coat | Programme confirmed at quote | $$$ | Occasional re-burnish, no re-coat |
| Epoxy floor system | Garages, workshops, commercial kitchens, wet areas | Long service life, then re-coat | Programme confirmed at quote | $$ | Re-coat at end of life |
| Grind and seal | Driveways, patios, offices, shop fit-outs | Periodic re-seal | Programme confirmed at quote | $ | Re-seal when the finish dulls |
| Microcement | Bathrooms, feature walls, benchtops, boutique retail | Periodic re-seal | Programme confirmed at quote | $$$ | Re-seal when the finish dulls |
Relative cost is a rough guide only. We quote every floor individually after looking at it, so request a quote with a photo and we can usually tell you a lot before we visit.
The same crew, machinery and standards across both.
It depends on where the floor is and what it has to put up with. As a rule: polished concrete for living areas and long-life commercial floors, grind and seal for driveways, patios and budget fit-outs, epoxy or flake for garages, workshops and kitchens, microcement for bathrooms and feature walls. Send us a photo and a few lines about the floor and we will tell you which finish suits it.
Polished concrete is a mechanical process that hardens and polishes the slab itself and lasts the life of the building. Grind and seal applies a sealer on top after a lighter diamond grind and gets re-coated every three to seven years. Polished costs more up front and wins on lifecycle. Grind and seal is faster and cheaper to install.
Yes. Driveways, garages, patios, living areas and benchtops sit alongside warehouses, workshops and shop fit-outs in our work. The same crew and the same machines do both; what changes is the finish we recommend.
Yes. Manufacturer data sheets for each system, SWMS, insurance certificates and slip ratings are available on request. Ask for them on the quote form or by email and we will send them through with your quote.
Gold Coast, Brisbane, Sunshine Coast, Tweed Heads, Byron Shire and Northern NSW as standard. Larger projects we mobilise across all of South-East Queensland.
Send the floor size, location, timeframe and photos. We will use them to assess the job before arranging a site visit.
