An epoxy flake floor is an epoxy floor finished with decorative flakes, sealed under a clear urethane topcoat. The colour is the part you see every day, so it's worth choosing carefully. Here's how colour and finish are chosen on our flake floors, and how the floor goes down.
Two flake ranges
We work with two ranges:
- Natural stone range: for a premium, stone-like finish.
- Standard range: a wide choice of colours.
Custom colour blends
You aren't stuck with a set colour. The flake is blended to your colours and custom-mixed to order, so the floor can match a home, a brand or a fit-out.
Three finish options
- standard flake
- full broadcast
- metallic-flake hybrid
See it before it goes down
You choose the colour and finish at quote stage. We then confirm it on a sample board before we install, so you see the real colours first.
Where an epoxy flake floor suits
- home garages and sheds
- laundries and wet areas
- automotive workshops and dealerships
- commercial kitchens
- food and beverage processing rooms
- retail back-of-house areas
- gyms and training facilities
Epoxy flake garage floors
For an epoxy flake garage floor, empty the garage first, including anything bolted to the floor. Keep vehicles off the slab until we tell you it's ready to drive on.
Epoxy flake floor installation, step by step
1. Grind and prime. We diamond-grind the slab to open it up, repair it where it needs it, then prime it.
2. Base coat and broadcast. We broadcast the flake into a wet epoxy base coat until the surface won't take any more.
3. Scrape back. We remove the loose flake, then scrape and sand the surface flat.
4. Topcoat. A clear urethane topcoat seals the floor. Where you want more grip, we add coarse aggregate.
5. Cure and handover. Foot traffic goes on first and vehicles later. On the day, we give you the cure times and the cleaning method.
You get the programme, with timings, as part of your quote.
Typical figures
These are typical for this type of system and come from manufacturer data:
- Total build: 1 to 2mm
- Chemical resistance: moderate to high, depending on the topcoat. The urethane topcoat resists most automotive and food chemicals.
- Slip resistance: we choose the texture to suit, and arrange testing (AS 4586) where your spec calls for it.
If the floor faces severe chemical exposure, we move it up to a vinyl ester or polyurethane cement system instead.
Why Total Grind N Polish
We've been working on Gold Coast floors since 2005, with more than 1,000 projects delivered. We're locally owned and fully insured, we use H-class dust extraction, and every quote is fixed and in writing. We lay flake floors across the Gold Coast, Brisbane and Northern NSW.
Ready to pick your colours? Book a free on-site quote and see our flake flooring service.



