Loading...
Fixed written quotes
Every system we install in one table, for builders, architects and project managers. Filter by family, project size and industry, then sort by slip rating, build or lifecycle. The shortlist writes itself.
Every system has a manufacturer data sheet, but most builders and architects start with a shortlist. Use the filters below to narrow by family and project size, then sort the table to find the two or three candidates worth a deeper look. Click any system name to open the full service page.
Combine system family, project size and industry to shortlist the systems worth writing into your spec.
System family
Project size
Industry fit
| Additional Flooring Services Surface prep, glue removal, levelling, coving, joint work, line marking, cleaning and re-sealing. | Any | - | - | - | Annual inspection |
| Concrete Benchtops Custom poured, ground and sealed concrete benchtops for cafes, bars and home kitchens. | Single benchtop to full fit-out | - | - | Honed matte, Semi-polished | Annual inspection |
| Epoxy Flooring Epoxy floor systems for garages, workshops, showrooms, factories and warehouses. | Single garage to 10,000m²+ | Textured finishes available; testing arranged where the spec calls for it | Full matrix available on spec sheet | High-build, Self-levelling | Annual inspection |
| Faux-Stone Microcement Monolithic decorative microcement for floors, walls, benchtops and feature elements. | Single bathroom to 500m² | Texture chosen to suit; testing arranged where the spec calls for it | - | 3 to 4mm total | Periodic re-seal |
| Flake Flooring Decorative slip-resistant flake-broadcast epoxy for workshops, commercial kitchens and garages. | Single garage to 2,000m² | Texture chosen to suit; testing arranged where the spec calls for it | Moderate to high depending on topcoat | 1 to 2mm | Annual inspection |
| Honed Concrete Floors Natural, matte stone-exposed concrete for outdoor and architectural applications. | Pool surround to 2,000m²+ | Anti-slip additive available; testing arranged where the spec calls for it | - | Light exposure, Medium exposure | Periodic re-seal |
| Indoor Concrete Grinding and Sealing Ground and topically sealed concrete for internal commercial and residential spaces. | Single room to 3,000m²+ | Anti-slip additive available; testing arranged where the spec calls for it | Moderate (not for heavy industrial) | Gloss, Satin | Re-coat at end of life |
| Industrial Coatings Resin and polyurethane systems built for forklifts, reagents, hot wash and impact. | Small workshop to 10,000m²+ | Textured broadcast available; testing arranged where the spec calls for it | - | High-build epoxy, Polyurethane cement | Re-coat at end of life |
| Mechanically Polished Concrete Polished concrete for living areas, showrooms and warehouses, from a single room to 10,000m²+. | Single room to 10,000m²+ | Arranged where the spec calls for it; anti-slip options for wet zones | - | Nil exposure (cream finish), Minimal exposure (salt and pepper) | Re-coat at end of life |
| Natural Stone Flooring and Restoration Diamond-grinding, honing, polishing and repair of natural and engineered stone surfaces. | Single benchtop to whole-floor restoration | - | - | Honed, Polished | Annual inspection |
| Outdoor Concrete Grinding and Sealing Ground and UV-sealed concrete for outdoor commercial, residential and retail spaces. | Driveway to 3,000m²+ | Anti-slip additive available; testing arranged where the spec calls for it | - | Satin, Matte | Periodic re-seal |
Each column captures one lens you use when shortlisting systems. The matrix is a starting point. The manufacturer data sheet is the source of truth, and the quote is where we tailor the system to your site after we have looked at the slab.
Slip rating
Quoted against AS 4586. R-values cover the ramp test, P-values cover the pendulum wet test. Final ratings shift with the topcoat and texture chosen at spec time, and testing is arranged where the spec calls for it.
Chemical resistance
Broad indication only. Send your SDS list with the quote request and we return the manufacturer's compatibility data for the system we recommend.
Typical build
Total dry-film thickness or finish depth for the stated use case. Heavier builds are available where impact, thermal shock or load demands it.
Lifecycle
Typical maintenance cadence once the floor is in service. Regular inspection picks up early wear so a re-burnish or re-seal happens before any visible drop in appearance.
Tell us the systems on your shortlist, the project context and the standards the spec calls for. The manufacturer data sheets for the systems we recommend come with the quote, along with the chemical resistance data and the standards they reference.
Send the shortlist and the drawings through the form, or email info@totalgrind.com. We will come and look at the slab before we price it.